Merge branch 'master' of git.nordu.net:sunet-opssunet-ops-2015-04-14-v23

5 files changed, 1028 insertions, 7 deletions

diff --git a/global/overlay/etc/puppet/manifests/cosmos-site.pp b/global/overlay/etc/puppet/manifests/cosmos-site.pp
index f13360d..d447b07 100644
--- a/global/overlay/etc/puppet/manifests/cosmos-site.pp
+++ b/global/overlay/etc/puppet/manifests/cosmos-site.pp
@@ -697,7 +697,7 @@ node 'cdr1.sunet.se' {
 }
 
 node 'sto-tug-kvm2.swamid.se' {
-   #class { 'fail2ban': }
+   class { 'fail2ban': }
    package {'nagios-nrpe-server':
        ensure => 'installed',
    } ->
@@ -827,12 +827,12 @@ class fail2ban {
 
   package {'fail2ban': ensure => 'latest'}
   augeas { "fail2ban_defaults":
-  incl => "/etc/fail2ban/jail.conf",
-  lens => "Shellvars.lns",
-   changes => [
-     'set bantime "604800"',
-    ],
-   notify => Service['fail2ban'],
+      incl => "/etc/fail2ban/jail.conf",
+      lens => "Shellvars.lns",
+      changes => [
+          'set bantime "604800"',
+      ],
+      notify => Service['fail2ban'],
   }
 }
 
diff --git a/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.cfg b/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.cfg
new file mode 100644
index 0000000..043ea90
--- /dev/null
+++ b/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.cfg
@@ -0,0 +1,246 @@
+#############################################################################
+# Sample NRPE Config File 
+# Written by: Ethan Galstad (nagios@nagios.org)
+# 
+# Last Modified: 11-23-2007
+#
+# NOTES:
+# This is a sample configuration file for the NRPE daemon.  It needs to be
+# located on the remote host that is running the NRPE daemon, not the host
+# from which the check_nrpe client is being executed.
+#############################################################################
+
+
+# LOG FACILITY
+# The syslog facility that should be used for logging purposes.
+
+log_facility=daemon
+
+
+
+# PID FILE
+# The name of the file in which the NRPE daemon should write it's process ID
+# number.  The file is only written if the NRPE daemon is started by the root
+# user and is running in standalone mode.
+
+pid_file=/var/run/nagios/nrpe.pid
+
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# NOTE: This must be a non-priviledged port (i.e. > 1024).
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+server_port=5666
+
+
+
+# SERVER ADDRESS
+# Address that nrpe should bind to in case there are more than one interface
+# and you do not want nrpe to bind on all interfaces.
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+#server_address=127.0.0.1
+
+
+
+# NRPE USER
+# This determines the effective user that the NRPE daemon should run as.  
+# You can either supply a username or a UID.
+# 
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_user=nagios
+
+
+
+# NRPE GROUP
+# This determines the effective group that the NRPE daemon should run as.  
+# You can either supply a group name or a GID.
+# 
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_group=nagios
+
+
+
+# ALLOWED HOST ADDRESSES
+# This is an optional comma-delimited list of IP address or hostnames 
+# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
+# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently 
+# supported.
+#
+# Note: The daemon only does rudimentary checking of the client's IP
+# address.  I would highly recommend adding entries in your /etc/hosts.allow
+# file to allow only the specified host to connect to the port
+# you are running this daemon on.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+allowed_hosts=109.105.111.111,2001:948:4:6::111
+ 
+
+
+# COMMAND ARGUMENT PROCESSING
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments to commands that are executed.  This option only works
+# if the daemon was configured with the --enable-command-args configure script
+# option.  
+#
+# *** ENABLING THIS OPTION IS A SECURITY RISK! *** 
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow arguments, 1=allow command arguments
+
+dont_blame_nrpe=0
+
+
+
+# BASH COMMAND SUBTITUTION
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments that contain bash command substitutions of the form
+# $(...).  This option only works if the daemon was configured with both 
+# the --enable-command-args and --enable-bash-command-substitution configure 
+# script options.
+#
+# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! *** 
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow bash command substitutions, 
+#         1=allow bash command substitutions
+
+allow_bash_command_substitution=0
+
+
+
+# COMMAND PREFIX
+# This option allows you to prefix all commands with a user-defined string.
+# A space is automatically added between the specified prefix string and the
+# command line from the command definition.
+#
+# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
+# Usage scenario: 
+# Execute restricted commmands using sudo.  For this to work, you need to add
+# the nagios user to your /etc/sudoers.  An example entry for alllowing 
+# execution of the plugins from might be:
+#
+# nagios          ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
+#
+# This lets the nagios user run all commands in that directory (and only them)
+# without asking for a password.  If you do this, make sure you don't give
+# random users write access to that directory or its contents!
+
+# command_prefix=/usr/bin/sudo 
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging messages are logged to the
+# syslog facility.
+# Values: 0=debugging off, 1=debugging on
+
+debug=0
+
+
+
+# COMMAND TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# allow plugins to finish executing before killing them off.
+
+command_timeout=60
+
+
+
+# CONNECTION TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# wait for a connection to be established before exiting. This is sometimes
+# seen where a network problem stops the SSL being established even though
+# all network sessions are connected. This causes the nrpe daemons to
+# accumulate, eating system resources. Do not set this too low.
+
+connection_timeout=300
+
+
+
+# WEEK RANDOM SEED OPTION
+# This directive allows you to use SSL even if your system does not have
+# a /dev/random or /dev/urandom (on purpose or because the necessary patches
+# were not applied). The random number generator will be seeded from a file
+# which is either a file pointed to by the environment valiable $RANDFILE
+# or $HOME/.rnd. If neither exists, the pseudo random number generator will
+# be initialized and a warning will be issued.
+# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
+
+#allow_weak_random_seed=1
+
+
+
+# INCLUDE CONFIG FILE
+# This directive allows you to include definitions from an external config file.
+
+#include=<somefile.cfg>
+
+
+
+# INCLUDE CONFIG DIRECTORY
+# This directive allows you to include definitions from config files (with a
+# .cfg extension) in one or more directories (with recursion).
+
+#include_dir=<somedirectory>
+#include_dir=<someotherdirectory>
+
+
+
+# COMMAND DEFINITIONS
+# Command definitions that this daemon will run.  Definitions
+# are in the following format:
+#
+# command[<command_name>]=<command_line>
+#
+# When the daemon receives a request to return the results of <command_name>
+# it will execute the command specified by the <command_line> argument.
+#
+# Unlike Nagios, the command line cannot contain macros - it must be
+# typed exactly as it should be executed.
+#
+# Note: Any plugins that are used in the command lines must reside
+# on the machine that this daemon is running on!  The examples below
+# assume that you have plugins installed in a /usr/local/nagios/libexec
+# directory.  Also note that you will have to modify the definitions below
+# to match the argument format the plugins expect.  Remember, these are
+# examples only!
+
+
+# The following examples use hardcoded command arguments...
+
+command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
+command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
+command[check_root]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /
+command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
+command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 
+
+
+# The following examples allow user-supplied arguments and can
+# only be used if the NRPE daemon was compiled with support for 
+# command arguments *AND* the dont_blame_nrpe directive in this
+# config file is set to '1'.  This poses a potential security risk, so
+# make sure you read the SECURITY file before doing this.
+
+#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
+#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
+#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+
+#
+# local configuration:
+#	if you'd prefer, you can instead place directives here
+include=/etc/nagios/nrpe_local.cfg
+
+# 
+# you can place your config snipplets into nrpe.d/
+# only snipplets ending in .cfg will get included
+include_dir=/etc/nagios/nrpe.d/
+
diff --git a/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.d/cosmos_nrpe.cfg b/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.d/cosmos_nrpe.cfg
new file mode 100644
index 0000000..40dc7b1
--- /dev/null
+++ b/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.d/cosmos_nrpe.cfg
@@ -0,0 +1,17 @@
+# ###################################################
+# # This file is maintained in
+# #
+# #    ####    ####    ####   #    #   ####    ####
+# #   #    #  #    #  #       ##  ##  #    #  #
+# #   #       #    #   ####   # ## #  #    #   ####
+# #   #       #    #       #  #    #  #    #       #
+# #   #    #  #    #  #    #  #    #  #    #  #    #
+# #    ####    ####    ####   #    #   ####    ####
+# #
+# # ... so you can't just change it locally.
+# #
+# ###################################################
+
+command[check_uptime]=/usr/lib/nagios/plugins/check_uptime.pl -f
+command[check_reboot]=/usr/lib/nagios/plugins/check_reboot
+command[check_root]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /
diff --git a/sto-tug-kvm2.swamid.se/overlay/usr/lib/nagios/plugins/check_reboot b/sto-tug-kvm2.swamid.se/overlay/usr/lib/nagios/plugins/check_reboot
new file mode 100755
index 0000000..4cb9df3
--- /dev/null
+++ b/sto-tug-kvm2.swamid.se/overlay/usr/lib/nagios/plugins/check_reboot
@@ -0,0 +1,37 @@
+#!/bin/bash
+declare -rx PROGNAME=${0##*/}
+declare -rx PROGPATH=${0%/*}/
+
+function cleanup {
+	#if [ -e "$TMPFILE" ] ; then
+		#rm "$TMPFILE"
+	#fi
+	exit $1
+}
+
+if [ -r "${PROGPATH}utils.sh" ] ; then
+	source "${PROGPATH}utils.sh"
+else
+	echo "Can't find utils.sh."
+	printf "Currently being run from %s\n" "$PROGPATH"
+	# since we couldn't define STATE_UNKNOWN since reading utils.sh failed, we use 3 here but everywhere else after this use cleanup $STATE
+	cleanup 3
+fi
+
+STATE=$STATE_UNKNOWN
+
+
+if [ -f /var/run/reboot-required.pkgs ]
+then
+	pkg=`cat /var/run/reboot-required.pkgs`
+fi
+
+if [ -f /var/run/reboot-required ]
+then
+	echo "Reboot WARNING: System reboot required by package $pkg" 
+        cleanup $STATE_WARNING; 
+fi
+      echo "Reboot OK: No reboot required"
+      cleanup $STATE_OK;
+cleanup $STATE;
+
diff --git a/sto-tug-kvm2.swamid.se/overlay/usr/lib/nagios/plugins/check_uptime.pl b/sto-tug-kvm2.swamid.se/overlay/usr/lib/nagios/plugins/check_uptime.pl
new file mode 100755
index 0000000..dda05e4
--- /dev/null
+++ b/sto-tug-kvm2.swamid.se/overlay/usr/lib/nagios/plugins/check_uptime.pl
@@ -0,0 +1,721 @@
+#!/usr/bin/perl -w
+#
+# ============================== SUMMARY =====================================
+#
+# Program : check_uptime.pl
+# Version : 0.52
+# Date    : June 19, 2012
+# Authors : William Leibzon - william@leibzon.org
+# Licence : GPL - summary below, full text at http://www.fsf.org/licenses/gpl.txt
+#
+# =========================== PROGRAM LICENSE =================================
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# ===================== INFORMATION ABOUT THIS PLUGIN =========================
+#
+#  This plugin returns uptime of the system returning data in text (readable)
+#  format as well as in minutes for performance graphing. The plugin can either
+#  run on local system unix system (that supports standard 'uptime' command
+#  or check remote system by SNMP. The plugin can report one CRITICAL or
+#  WARNING alert if system has been rebooted since last check.
+#
+# ======================  SETUP AND PLUGIN USE NOTES  =========================
+#
+#  The plugin can either retrieve information from local system (when you
+#  run it through check_nrpe for example) or by SNMP from remote system.
+#
+#  On local system it will execute standard unix 'uptime' and 'uname -a'.
+#
+#  On a remote system it'll retrieve data from sysSystem for system type
+#  and use that to decide if further data should be retrieved from 
+#    sysUptime (OID 1.3.6.1.2.1.1.3.0) for windows or 
+#    hostUptime (OID 1.3.6.1.2.1.25.1.1.0) for unix system or
+#    snmpEngineTime (OID 1.3.6.1.6.3.10.2.1.3) for cisco switches
+#
+#  For information on available options please execute it with --help i.e:
+#    check_uptime.pl --help
+#
+#  As I dont have time for extensive documentation below is all very brief:
+#
+#  1. You can also specify warning and critical thresholds which will
+#     give warning or critical alert if system has been up for lees then
+#     specified number of minutes. Example: 
+#        check_uptime.pl -w 5
+#     Will give warning alert if system has been up for less then 5 minutes
+#
+#  2. For performance data results you can use '-f' option which will give
+#     total number of minutes the system has been up.
+#
+#  3. A special case is use of performance to feed data from previous run
+#     back into the plugin. This is used to cache results about what type
+#     of system it is (you can also directly specify this with -T option)
+#     and also means -w and -c threshold values are ignored and instead
+#     plugin will issue ONE alert (warning or critical) if system uptime
+#     changes from highier value to lower
+#
+# ============================ EXAMPLES =======================================
+#
+# 1. Local server (use with NRPE or on nagios host), warning on < 5 minutes:
+#
+# define command {
+#        command_name check_uptime
+#        command_line $USER1$/check_uptime.pl -f -w 5
+# }
+# 
+# 2. Local server (use with NRPE or on nagios host), 
+#    one critical alert on reboot:
+#
+# define command {
+#        command_name check_uptime
+#        command_line $USER1$/check_uptime.pl -f -c -P "SERVICEPERFDATA$"
+# }
+#
+# 3. Remote server SNMP v2, one warning alert on reboot,
+#    autodetect and cache type of server:
+#
+# define command {
+#        command_name check_snmp_uptime_v2
+#        command_line $USER1$/check_uptime.pl -2 -f -w -H $HOSTADDRESS$ -C $_HOSTSNMP_COMMUNITY$ -P "$SERVICEPERFDATA$"
+# }
+#
+# 4. Remote server SNMP v3, rest as above
+#
+#define command {
+#        command_name check_snmp_uptime_v3
+#        command_line $USER1$/check_uptime.pl -f -w -H $HOSTADDRESS$ -l $_HOSTSNMP_V3_USER$ -x $_HOSTSNMP_V3_AUTH$ -X $_HOSTSNMP_V3_PRIV$ -L sha,aes -P "$SERVICEPERFDATA$"
+# }
+# 
+# 5. Example of service definition using above
+#
+# define service{
+#      use				std-service
+#      hostgroup_name			all_snmp_hosts
+#      service_description		SNMP Uptime
+#      max_check_attempts               1
+#      check_command			check_snmp_uptime
+# }
+#
+# 6. And this is optional dependency definition for above which makes
+#    every SNMP service (service beloning to SNMP servicegroup) on
+#    same host dependent on this SNMP Uptime check. Then if SNMP
+#    daemon goes down you only receive one alert
+#
+# define servicedependency{
+#        service_description SNMP Uptime
+#        dependent_servicegroup_name snmp
+# }
+#
+# ============================= VERSION HISTORY ==============================
+#
+# 0.1 - sometime 2006 : Simple script for tracking local system uptime
+# 0.2 - sometime 2008 : Update to get uptime by SNMP, its now alike my other plugins 
+# 0.3 -  Nov 14, 2009 : Added getting system info line and using that to decide
+#		        format of uptime line and how to process it. Added support
+#			for getting uptime with SNMP from windows systems.
+#			Added documentation header alike my other plugins.
+#			Planned to release it to public, but forgot.
+# 0.4  - Dec 19, 2011 : Update to support SNMP v3, released to public
+# 0.41 - Jan 13, 2012 : Added bug fix by Rom_UA posted as comment on Nagios Exchange
+#			Added version history you're reading right now.
+# 0.42 - Feb 13, 2012 : Bug fix to not report WARNING if uptime is not correct output
+# 0.5  - Feb 29, 2012 : Added support for "netswitch" engine type that retrieves
+#		        snmpEngineTime. Added proper support for sysUpTime interpreting
+#			it as 1/100s of a second and converting to days,hours,minutes
+#			Changed internal processing structure, now reported uptime
+#			info text is based on uptime_minutes and not separate.
+# 0.51 - Jun 05, 2012 : Bug fixed for case when when snmp system info is < 3 words.
+# 0.52 - Jun 19, 2012 : For switches if snmpEngineTime OID is not available,
+#		        the plugin will revert back to checking hostUptime and
+#			then sysUptime. Entire logic has in fact been changed
+#			to support trying more than just two OIDs. Also added
+#			support to specify filename to '-v' option for debug
+#		        output to go to instead of console and for '--debug'
+#			option as an alias to '--verbose'.
+# 
+# TODO:
+#   0) Add '--extra-opts' to allow to read options from a file as specified
+#      at http://nagiosplugins.org/extra-opts. This is TODO for all my plugins
+#   1) Add support for ">", "<" and other threshold qualifiers
+#      as done in check_snmp_temperature.pl or check_mysqld.pl
+#   2) Support for more types, in particular network equipment such as cisco: [DONE]
+#      	     sysUpTime is a 32-bit counter in 1/100 of a second, it rolls over after 496 days
+#            snmpEngineTime (.1.3.6.1.6.3.10.2.1.3) returns the uptime in seconds and will not
+#            roll over, however some cisco switches (29xx) are buggy and it gets reset too.
+#            Routers running 12.0(3)T or higher can use the snmpEngineTime object from
+#            the SNMP-FRAMEWORK-MIB.  This keeps track of seconds since SNMP engine started.
+#   3) Add threshold into perfout as ';warn;crit'
+#
+# ========================== START OF PROGRAM CODE ===========================
+
+use strict;
+use Getopt::Long;
+
+# Nagios specific
+our $TIMEOUT;
+our %ERRORS;
+eval 'use utils qw(%ERRORS $TIMEOUT)';
+if ($@) {
+ $TIMEOUT = 10;
+ %ERRORS = ('OK'=>0,'WARNING'=>1,'CRITICAL'=>2,'UNKNOWN'=>3,'DEPENDENT'=>4);
+}
+
+our $no_snmp=0;
+eval 'use Net::SNMP';
+if ($@) {
+  $no_snmp=1;
+}
+
+# Version 
+my $Version='0.52';
+
+# SNMP OID
+my $oid_sysSystem = '1.3.6.1.2.1.1.1.0';	     # windows and some unix
+my $oid_hostUptime = '1.3.6.1.2.1.25.1.1.0';         # hostUptime, usually unix systems
+my $oid_sysUptime = '1.3.6.1.2.1.1.3.0';             # sysUpTime, windows
+my $oid_engineTime = '1.3.6.1.6.3.10.2.1.3';         # SNMP-FRAMEWORK-MIB
+
+my @oid_uptime_types = ( ['', '', ''],		      	      # type 0 is reserved
+	   [ 'local', '', ''],                                # type 1 is local
+           [ 'win', 'sysUpTime', $oid_sysUptime ], 	      # type 2 is windows
+	   [ 'unix-host', 'hostUpTime', $oid_hostUptime ],    # type 3 is unix-host
+	   [ 'unix-sys', 'sysUpTime', $oid_sysUptime ],       # type 4 is unix-sys
+	   [ 'net', 'engineTime', $oid_engineTime ]);         # type 5 is netswitch 
+
+# Not used, but perhaps later
+my $oid_hrLoad = '1.3.6.1.2.1.25.3.3.1.2.1';
+my $oid_sysLoadInt1 = '1.3.6.1.4.1.2021.10.1.5.1';
+my $oid_sysLoadInt5 = '1.3.6.1.4.1.2021.10.1.5.2';
+my $oid_sysLoadInt15 = '1.3.6.1.4.1.2021.10.1.5.3';
+
+# Standard options
+my $o_host = 		undef; 	# hostname
+my $o_timeout=  	undef;  # Timeout (Default 10) 
+my $o_help=		undef; 	# wan't some help ?
+my $o_verb=		undef;	# verbose mode
+my $o_version=		undef;	# print version
+my $o_label=		undef;	# change label instead of printing uptime
+my $o_perf=             undef;  # Output performance data (uptime in minutes)
+my $o_prevperf=		undef;	# performance data given with $SERVICEPERFDATA$ macro
+my $o_warn=             undef;  # WARNING alert if system has been up for < specified number of minutes
+my $o_crit=             undef;  # CRITICAL alert if system has been up for < specified number of minutes
+my $o_type=             undef;  # type of check (local, auto, unix, win)
+
+# Login and other options specific to SNMP
+my $o_port =		161;    # SNMP port
+my $o_community =	undef; 	# community
+my $o_version2	=	undef;	# use snmp v2c
+my $o_login=		undef;	# Login for snmpv3
+my $o_passwd=		undef;	# Pass for snmpv3
+my $v3protocols=	undef;	# V3 protocol list.
+my $o_authproto=	'md5';	# Auth protocol
+my $o_privproto=	'des';	# Priv protocol
+my $o_privpass= 	undef;	# priv password
+
+## Additional global variables
+my %prev_perf=	();     # array that is populated with previous performance data
+my $check_type = 0;
+
+sub p_version { print "check_uptime version : $Version\n"; }
+
+sub print_usage {
+    print "Usage: $0 [-v [debugfilename]] [-T local|unix-host|unix-sys|win|net] [-H <host> (-C <snmp_community>) [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>) [-p <port>]] [-w <warn minutes> -s <crit minutes>] [-f] [-P <previous perf data from nagios \$SERVICEPERFDATA\$>] [-t <timeout>] | [-V] [--label <string>]\n";
+}
+
+sub isnnum { # Return true if arg is not a number
+  my $num = shift;
+  if ( $num =~ /^(\d+\.?\d*)|(^\.\d+)$/ ) { return 0 ;}
+  return 1;
+}
+
+sub div_mod { return int( $_[0]/$_[1]) , ($_[0] % $_[1]); }
+
+sub help {
+   print "\nUptime Plugin for Nagios (check_uptime) v. ",$Version,"\n";
+   print "GPL licence, (c) 2008-2012 William Leibzon\n\n";
+   print_usage();
+   print <<EOT;
+
+Debug & Console Options:
+ -v, --verbose[=FILENAME], --debug[=FILENAME]
+   print extra debugging information.
+   if filename is specified instead of STDOUT the debug data is written to that file
+ -h, --help
+   print this help message
+ -V, --version
+   prints version number
+
+Standard Options:
+ -T, --type=auto|local|unix-host|unis-sys|windows|netswitch
+   Type of system:
+     local           : localhost (executes 'uptime' command), default if no -C or -l
+     unix-host       : SNMP check from hostUptime ($oid_hostUptime) OID
+     unix-sys        : SNMP check from sysUptime ($oid_sysUptime) OID
+     win | windows   : SNMP check from sysUptime ($oid_sysUptime) OID
+     net | netswitch : SNMP check from snmpEngineTime ($oid_engineTime) OID
+     auto            : Autodetect what system by checking sysSystem OID first, default
+ -w, --warning[=minutes]
+   Report nagios WARNING alert if system has been up for less then specified
+   number of minutes. If no minutes are specified but previous preformance
+   data is fed back with -P option then alert is sent ONLY ONCE when
+   uptime changes from greater value to smaller
+ -c, --critical[=minutes]
+   Report nagios CRITICAL alert if system has been up for less then
+   specified number of minutes or ONE ALERT if -P option is used and
+   system's previous uptime is larger then current on
+ -f, --perfparse
+   Perfparse compatible output 
+ -P, --prev_perfdata
+   Previous performance data (normally put '-P \$SERVICEPERFDATA\$' in
+   nagios command definition). This is recommended if you dont specify
+   type of system with -T so that previously checked type of system info
+   is reused. This is also used to decide on warning/critical condition
+   if number of seconds is not specified with -w or -c.
+ --label=[string]
+   Optional custom label before results prefixed to results
+ -t, --timeout=INTEGER
+   timeout for SNMP in seconds (Default: 15)
+ 
+SNMP Access Options:
+ -H, --hostname=HOST
+   name or IP address of host to check (if not localhost)
+ -C, --community=COMMUNITY NAME
+   community name for the SNMP agent (used with v1 or v2c protocols)
+ -2, --v2c
+   use snmp v2c (can not be used with -l, -x)
+ -l, --login=LOGIN ; -x, --passwd=PASSWD
+   Login and auth password for snmpv3 authentication 
+   If no priv password exists, implies AuthNoPriv 
+ -X, --privpass=PASSWD
+   Priv password for snmpv3 (AuthPriv protocol)
+ -L, --protocols=<authproto>,<privproto>
+   <authproto> : Authentication protocol (md5|sha : default md5)
+   <privproto> : Priv protocols (des|aes : default des) 
+ -p, --port=PORT
+   SNMP port (Default 161)
+EOT
+}
+
+# For verbose output (updated 06/06/12 to write to debug file if specified)
+sub verb {
+    my $t=shift;
+    if (defined($o_verb)) {
+        if ($o_verb eq "") {
+                print $t,"\n";
+        }
+        else {
+            if (!open(DEBUGFILE, ">>$o_verb")) {
+                print $t, "\n";
+            }
+            else {
+                print DEBUGFILE $t,"\n";
+                close DEBUGFILE;
+            }
+        }
+    }
+}
+
+# load previous performance data 
+sub process_perf {
+ my %pdh;
+ my ($nm,$dt);
+ foreach (split(' ',$_[0])) {
+   if (/(.*)=(.*)/) {
+        ($nm,$dt)=($1,$2);
+        verb("prev_perf: $nm = $dt");
+	# in some of my plugins time_ is to profile how long execution takes for some part of plugin
+        # $pdh{$nm}=$dt if $nm !~ /^time_/;
+	$pdh{$nm}=$dt;
+   }
+ }
+ return %pdh;
+}
+
+sub type_from_name {
+  my $type=shift;
+  for(my $i=1; $i<scalar(@oid_uptime_types); $i++) {
+      if ($oid_uptime_types[$i][0] eq $type) {
+          return $i;
+      }
+   }
+   return -1;
+}
+
+
+sub check_options {
+    Getopt::Long::Configure ("bundling");
+	GetOptions(
+   	'v:s'	=> \$o_verb,		'verbose:s'	=> \$o_verb,  "debug:s" => \$o_verb,
+        'h'     => \$o_help,    	'help'        	=> \$o_help,
+        'H:s'   => \$o_host,		'hostname:s'	=> \$o_host,
+        'p:i'   => \$o_port,   		'port:i'	=> \$o_port,
+        'C:s'   => \$o_community,	'community:s'	=> \$o_community,
+	 '2'	=> \$o_version2,	'v2c'		=> \$o_version2,
+	'l:s'	=> \$o_login,		'login:s'	=> \$o_login,
+	'x:s'	=> \$o_passwd,		'passwd:s'	=> \$o_passwd,
+	'X:s'	=> \$o_privpass,	'privpass:s'	=> \$o_privpass,
+	'L:s'	=> \$v3protocols,	'protocols:s'	=> \$v3protocols,
+        't:i'   => \$o_timeout,    	'timeout:i'	=> \$o_timeout,
+	'V'	=> \$o_version,		'version'	=> \$o_version,
+        'f'     => \$o_perf,            'perfparse'     => \$o_perf,
+        'w:i'   => \$o_warn,       	'warning:i'   	=> \$o_warn,
+        'c:i'   => \$o_crit,      	'critical:i'   	=> \$o_crit,
+	'label:s'   => \$o_label,
+	'P:s'	=> \$o_prevperf,	'prev_perfdata:s' => \$o_prevperf,
+	'T:s'   => \$o_type,            'type:s'        => \$o_type,
+    );
+    if (defined ($o_help) ) { help(); exit $ERRORS{"UNKNOWN"}};
+    if (defined($o_version)) { p_version(); exit $ERRORS{"UNKNOWN"}};
+
+    $o_type = "win" if defined($o_type) && $o_type eq 'windows';
+    $o_type = "net" if defined($o_type) && $o_type eq 'netswitch';
+    if (defined($o_type) && $o_type ne 'auto' && type_from_name($o_type)==-1) {
+	print "Invalid system type specified\n"; print_usage(); exit $ERRORS{"UNNKNOWN"};
+    }
+
+    if (!defined($o_community) && (!defined($o_login) || !defined($o_passwd)) ) { 
+	 $o_type='local' if !defined($o_type) || $o_type eq 'auto';
+	 if ($o_type ne 'local') {
+            print "Put snmp login info!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}
+         }
+	 if (defined($o_host)) {
+	    print "Why are you specifying hostname without SNMP parameters?\n"; print_usage(); exit $ERRORS{"UNKNOWN"};
+	 }
+    }
+    else {
+         $o_type='auto' if !defined($o_type);
+         if ($o_type eq 'local' ) {
+	     print "Why are you specifying SNMP login for local system???\n"; print_usage(); exit $ERRORS{"UNKNOWN"}
+         }
+         if (!defined($o_host)) {
+             print "Hostname required for SNMP check.\n"; print_usage(); exit $ERRORS{"UNKNOWN"};
+         }
+	 if ($no_snmp) {
+	     print "Can't locate Net/SNMP.pm\n"; print_usage(); exit $ERRORS{"UNKNOWN"};
+	 }
+    }
+
+    # check snmp information
+    if ((defined($o_login) || defined($o_passwd)) && (defined($o_community) || defined($o_version2)) )
+	{ print "Can't mix snmp v1,2c,3 protocols!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
+    if (defined ($v3protocols)) {
+	if (!defined($o_login)) { print "Put snmp V3 login info with protocols!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
+	my @v3proto=split(/,/,$v3protocols);
+	if ((defined ($v3proto[0])) && ($v3proto[0] ne "")) {$o_authproto=$v3proto[0];  }	# Auth protocol
+	if (defined ($v3proto[1])) {$o_privproto=$v3proto[1];	}	# Priv  protocol
+	if ((defined ($v3proto[1])) && (!defined($o_privpass)))
+	  { print "Put snmp V3 priv login info with priv protocols!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
+    }
+
+    if (defined($o_timeout) && (isnnum($o_timeout) || ($o_timeout < 2) || ($o_timeout > 60))) 
+	{ print "Timeout must be >1 and <60 !\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
+    if (!defined($o_timeout)) {$o_timeout=$TIMEOUT+5;}
+
+    if (defined($o_prevperf)) {
+        if (defined($o_perf)) {
+               %prev_perf=process_perf($o_prevperf);
+	       $check_type = $prev_perf{type} if $o_type eq 'auto' && exists($prev_perf{tye}) && exists($oid_uptime_types[$prev_perf{type}][0]);
+	}
+        else {
+               print "need -f option first \n"; print_usage(); exit $ERRORS{"UNKNOWN"};
+        }
+    }
+
+    if ($o_type eq 'auto') {
+        $check_type=0;
+    }
+    else {
+        $check_type = type_from_name($o_type);
+    }
+}
+
+sub create_snmp_session {
+  my ($session,$error);
+
+  if ( defined($o_login) && defined($o_passwd)) {
+    # SNMPv3 login
+    if (!defined ($o_privpass)) {
+     verb("SNMPv3 AuthNoPriv login : $o_login, $o_authproto");
+     ($session, $error) = Net::SNMP->session(
+      -hostname   	=> $o_host,
+      -version		=> '3',
+      -port      	=> $o_port,
+      -username		=> $o_login,
+      -authpassword	=> $o_passwd,
+      -authprotocol	=> $o_authproto,
+      -timeout          => $o_timeout
+     );  
+    } else {
+     verb("SNMPv3 AuthPriv login : $o_login, $o_authproto, $o_privproto");
+     ($session, $error) = Net::SNMP->session(
+      -hostname   	=> $o_host,
+      -version		=> '3',
+      -username		=> $o_login,
+      -port      	=> $o_port,
+      -authpassword	=> $o_passwd,
+      -authprotocol	=> $o_authproto,
+      -privpassword	=> $o_privpass,
+      -privprotocol     => $o_privproto,
+      -timeout          => $o_timeout
+     );
+    }
+  } else {
+    if (defined ($o_version2)) {
+    # SNMPv2c Login
+      verb("SNMP v2c login");
+      ($session, $error) = Net::SNMP->session(
+       -hostname  => $o_host,
+       -version   => 2,
+       -community => $o_community,
+       -port      => $o_port,
+       -timeout   => $o_timeout
+      );
+    } else {
+    # SNMPV1 login
+      verb("SNMP v1 login");
+      ($session, $error) = Net::SNMP->session(
+       -hostname  => $o_host,
+       -community => $o_community,
+       -port      => $o_port,
+       -timeout   => $o_timeout
+      );
+    }
+  }
+  if (!defined($session)) {
+     printf("ERROR opening session: %s.\n", $error);
+     exit $ERRORS{"UNKNOWN"};
+  }
+
+  return $session;
+}
+
+$SIG{'ALRM'} = sub {
+ print "Alarm timeout\n";
+ exit $ERRORS{"UNKNOWN"};
+};
+
+########## MAIN #######
+my $system_info="";
+my $uptime_info=undef;
+my $uptime_minutes=undef;
+my $perf_out="";
+my $status=0;
+my $uptime_output;
+my ($days, $hrs, $mins);
+
+check_options();
+
+# Check gobal timeout if snmp screws up
+if (defined($o_timeout)) {
+  verb("Alarm at $o_timeout + 5");
+  alarm($o_timeout+5);
+}
+
+if ($check_type==1) {  # local
+  # Process unix uptime command output
+  $uptime_output=`uptime`;
+  verb("Local Uptime Result is: $uptime_output");
+  if ($uptime_output =~ /(\d+)\s+days?,\s+(\d+)\:(\d+)/) {
+     ($days, $hrs, $mins) = ($1, $2, $3);
+  }
+  elsif ($uptime_output =~ /up\s+(\d+)\shours?\s+(\d+)/) {
+     ($days, $hrs, $mins) = (0, $1, $2);
+  }
+  elsif ($uptime_output =~ /up\s+(\d+)\:(\d+)/) {
+     ($days, $hrs, $mins) = (0, $1, $2);
+  }
+  elsif ($uptime_output =~ /up\s+(\d+)\s+min/) {
+     ($days, $hrs, $mins) = (0,0,$1);
+  }
+  elsif ($uptime_output =~ /up\s+(d+)s+days?,s+(d+)s+min/) {
+     ($days, $hrs, $mins) = ($1,0,$2);
+  }
+  else {
+     $uptime_info = "up ".$uptime_output;
+  }
+  if (defined($days) && defined($hrs) && defined($mins)) {
+     $uptime_minutes = $days*24*60+$hrs*60+$mins;
+  }
+  my @temp=split(' ',`uname -a`);
+  if (scalar(@temp)<3) {
+        $system_info=`uname -a`;
+  }
+  else {
+        $system_info=join(' ',$temp[0],$temp[1],$temp[2]);
+  }
+}
+else {
+  # SNMP connection
+  my $session=create_snmp_session();
+  my $result=undef;
+  my $oid="";
+  my $guessed_check_type=0;
+
+  if ($check_type==0){
+      $result = $session->get_request(-varbindlist=>[$oid_sysSystem]);
+      if (!defined($result)) {
+            printf("ERROR: Can not retrieve $oid_sysSystem table: %s.\n", $session->error);
+            $session->close;
+            exit $ERRORS{"UNKNOWN"};
+      }
+      verb("$o_host SysInfo Result from OID $oid_sysSystem: $result->{$oid_sysSystem}");
+      if ($result->{$oid_sysSystem} =~ /Windows/) {
+	  $guessed_check_type=2;
+	  verb('Guessing Type: 2 = windows');
+      }
+      if ($result->{$oid_sysSystem} =~ /Cisco/) {
+	  $guessed_check_type=5;
+	  verb('Guessing Type: 5 = netswitch');
+      }
+      if ($guessed_check_type==0) {
+	  $guessed_check_type=3; # will try hostUptime first
+      }
+      $oid=$oid_uptime_types[$guessed_check_type][2];
+  }
+  else {
+      $oid=$oid_uptime_types[$check_type][2];
+  }
+
+  do {
+      $result = $session->get_request(-varbindlist=>[$oid,$oid_sysSystem]);
+      if (!defined($result)) {
+          if ($check_type!=0) {
+              printf("ERROR: Can not retrieve uptime OID table $oid: %s.\n", $session->error);
+              $session->close;
+              exit $ERRORS{"UNKNOWN"};
+          }
+          else {
+              if ($session->error =~ /noSuchName/) {
+		  if ($guessed_check_type==4) {
+                      verb("Received noSuchName error for sysUpTime OID $oid. Giving up.");
+                      $guessed_check_type=0;
+		  } 
+	          if ($guessed_check_type==3) {
+            	      verb("Received noSuchName error for hostUpTime OID $oid, will now try sysUpTime");
+		      $guessed_check_type=4;
+	          }
+	          else {
+		      verb("Received noSuchName error for OID $oid, will now try hostUpTime");
+		      $guessed_check_type=3;
+		  }
+		  if ($guessed_check_type!=0) {
+		      $oid=$oid_uptime_types[$guessed_check_type][2];
+		  }
+	      }
+	      else {
+		  printf("ERROR: Can not retrieve uptime OID table $oid: %s.\n", $session->error);
+         	  $session->close;
+         	  exit $ERRORS{"UNKNOWN"};
+	      }
+	  }
+      }
+      else {
+          if ($check_type==0) {
+	      $check_type=$guessed_check_type;
+	  }
+      }
+  }
+  while (!defined($result) && $guessed_check_type!=0);
+
+  $session->close;
+  if ($check_type==0 && $guessed_check_type==0) {
+        printf("ERROR: Can not autodetermine proper uptime OID table. Giving up.\n");
+        exit $ERRORS{"UNKNOWN"};
+  }
+
+  my ($days, $hrs, $mins);
+  $uptime_output=$result->{$oid};
+  verb("$o_host Uptime Result from OID $oid: $uptime_output");
+
+  if ($uptime_output =~ /(\d+)\s+days?,\s+(\d+)\:(\d+)/) {
+    ($days, $hrs, $mins) = ($1, $2, $3);
+  }
+  elsif ($uptime_output =~ /(\d+)\s+hours?,\s+(\d+)\:(\d+)/) {
+    ($days, $hrs, $mins) = (0, $1, $2);
+  }
+  elsif ($uptime_output =~ /(\d+)\s+min/) {
+    ($days, $hrs, $mins) = (0, 0, $1);
+  }
+  if (defined($days) && defined($hrs) && defined($mins)) {
+    $uptime_minutes = $days*24*60+$hrs*60+$mins;
+  }
+  elsif ($uptime_output =~ /^(\d+)$/) {
+    my $upnum = $1;
+    if ($oid eq $oid_sysUptime) {
+	$uptime_minutes = $upnum/100/60; 
+    }
+    elsif ($oid eq $oid_engineTime) {
+	$uptime_minutes = $upnum/60;
+    }
+  }
+  else {
+    $uptime_info = "up ".$uptime_output;
+  }
+  my @temp=split(' ',$result->{$oid_sysSystem});
+  if (scalar(@temp)<3) {
+	$system_info=$result->{$oid_sysSystem};
+  }
+  else {
+	$system_info=join(' ',$temp[0],$temp[1],$temp[2]);
+  }
+}
+
+if (defined($uptime_minutes) && !defined($uptime_info)) {
+  ($hrs,$mins) = div_mod($uptime_minutes,60);
+  ($days,$hrs) = div_mod($hrs,24);
+  $uptime_info = "up ";
+  $uptime_info .= "$days days " if $days>0;
+  $uptime_info .= "$hrs hours " if $hrs>0;
+  $uptime_info .= "$mins minutes";
+}
+
+verb("System Type: $check_type (".$oid_uptime_types[$check_type][0].")");
+verb("System Info: $system_info") if $system_info;
+verb("Uptime Text: $uptime_info") if defined($uptime_info);
+verb("Uptime Minutes: $uptime_minutes") if defined($uptime_minutes);
+
+if (!defined($uptime_info)) {
+  $uptime_info = "Can not determine uptime";
+  $status = 3;
+}
+
+if (defined($o_perf)) {
+  $perf_out = "type=$check_type";
+  $perf_out .= " uptime_minutes=$uptime_minutes" if defined($uptime_minutes);
+}
+
+if (defined($uptime_minutes)) {
+  if (defined($o_prevperf)) {
+   	$status = 1 if defined($o_warn) && exists($prev_perf{uptime_minutes}) && $prev_perf{uptime_minutes} > $uptime_minutes;
+   	$status = 2 if defined($o_crit) && exists($prev_perf{uptime_minutes}) && $prev_perf{uptime_minutes} > $uptime_minutes;
+  }
+  else {
+   	$status = 1 if defined($o_warn) && !isnnum($o_warn) && $o_warn >= $uptime_minutes;
+   	$status = 2 if defined($o_crit) && !isnnum($o_crit) && $o_crit >= $uptime_minutes;
+  }
+}
+alarm(0);
+
+my $exit_status="UNKNOWN";
+$exit_status="OK" if $status==0;
+$exit_status="WARNING" if $status==1;
+$exit_status="CRITICAL" if $status==2;
+$exit_status="UNKNOWN" if $status==3;
+$exit_status="$o_label $exit_status" if defined($o_label);
+print "$exit_status: $system_info";
+print " - $uptime_info";
+print " | ",$perf_out if $perf_out;
+print "\n";
+exit $status;